Cat Flap in Glass Doors and Double Glazing: Fitting and Costs

You can't cut a hole in the glass you already have, but you can still fit a cat flap in a glass door or window. Here is how it works, what affects the price and the mistakes to avoid.

Fitting a cat flap in glass sounds impossible until you know how it’s done. After all, nobody wants to take a drill to their patio door.

The secret is that you don’t cut the glass you already have. Instead, a glass supplier makes a new glass unit with the hole built in, and a glazier fits it into your existing door or window.

Here’s how the process works, what affects the price and which mistakes to avoid. That way, your cat gets its freedom without your home losing any security or warmth.

Why you can’t cut a hole in your existing glass

Most doors and low-level windows use toughened glass. Toughened glass is heat-treated to make it stronger and safer, and once it’s toughened, you can’t cut or drill it. Try, and the whole pane shatters into small pieces.

Double glazing adds a second problem. The two panes form a sealed unit with dry air or gas between them. Cutting a hole through it would break that seal, and the unit would mist up.

So the hole has to exist before the factory toughens the glass and seals the unit. In other words, a cat flap in glass always means a new, made-to-measure glass unit.

How the hole stays sealed

In a double glazed unit, the manufacturer cuts matching holes in both panes before toughening them. They then fit a sealed ring between the panes around the hole, much like the spacer bar around the outside edge. The result is a fully sealed unit with a neat, round opening through the middle.

How a cat flap in glass is fitted, step by step

The whole job usually takes two visits: one to survey and measure, and one to fit. In between, the factory makes your new glass unit to order.

  1. Survey. The glazier checks the glass type, the frame and where the flap needs to sit.
  2. Choose the flap. You agree on a model that’s suitable for mounting in glass.
  3. Order the unit. The supplier makes the new glass unit with the hole in the right place.
  4. Remove the old glass. The engineer unclips the beads and lifts out the old unit. The frame stays.
  5. Fit the new unit. They pack it correctly, clip the beads back and check the door or window.
  6. Fit the flap. Finally, the engineer fits the cat flap through the hole and tests it.

Most made-to-measure units arrive within a week or two. Then, on fitting day, the work itself usually takes well under half a day.

How a cat flap is fitted in glass – infographic

Getting the height and position right

Position matters more than anything else. Once the factory makes the glass, the hole can’t move, so measure your cat before you measure the door.

The right height for your cat

As a rule of thumb, the bottom of the flap should sit at roughly the height of your cat’s belly. For most adult cats, that’s typically around 10–15 cm above the ground. Measure on the outside too, because a step or drop outside changes everything.

If the bottom of the glass sits too high, a small step or ramp on one side can solve it. Glass rules also set a minimum distance between the hole and the edge of the pane, so the flap can’t tuck right into a corner.

Keep it away from the lock

Think about security when you choose the position. Ideally, nobody should be able to reach a handle, key or thumb-turn by putting an arm through the flap. In practice, that usually means placing it low and towards the hinge side of the door.

Choosing the right flap for glass

Not every cat flap suits glass. A glass installation needs a flap designed for it, or one with a dedicated glass mounting kit.

  • Manual flaps are the simplest and cheapest option, with a basic lock.
  • Magnetic flaps open only for a cat wearing a magnet on its collar.
  • Microchip flaps read your cat’s existing microchip, so there’s no collar to lose.
  • Large flaps suit bigger breeds, though they need a bigger pane of glass.

Microchip flaps are popular because they keep neighbouring cats out. However, they run on batteries and usually need an adapter for glass. Check the flap’s instructions for the exact hole size before anyone orders the glass.

Check the flap suits your glass thickness

Double glazed units are typically 24–28 mm thick, and triple glazing is thicker still. Every glass mounting kit lists the range of glass thickness it fits. So confirm the flap and the unit match before ordering, rather than discovering a gap on fitting day.

For advice on introducing your cat to a new flap, Cats Protection offers practical, cat-friendly guidance.

Fitting a cat flap into a glass door means a new sealed unit made with the hole already cut, because toughened glass cannot be drilled afterwards. Our double glazing Bracknell page explains the glass options.

Want a cat flap in your glass door?

We fit cat flaps neatly in glass, uPVC and wooden doors across Bracknell. Call 07951 152 986 for a free quote with no call-out fee, or send us a photo of the door on WhatsApp.

Cat flap in glass, door panel or wall: which is best?

A cat flap in glass isn’t the only option. Depending on your door, another position may be cheaper or simpler.

OptionTypical UK cost (fitting, excluding the flap)Best forWatch out for
New double glazed unit with a holeTypically £180–£350Glazed back doors, patio doors, low windowsMade-to-measure lead time
New single toughened pane with a holeTypically £120–£250Single-glazed doors and conservatoriesLess insulation
Cut-out in a solid uPVC door panelTypically £80–£150Doors with a solid lower panelPanel must be suitable
Through an external wallTypically £150–£300+Homes with no suitable doorBuilding work, cavity and insulation
The flap itself£20–£50 manual, £60–£150 microchipEvery installationCheck it suits glass

These are general UK guide prices for standard sizes. The final figure depends on the size of the glass, its type, any patterns or bars and access to the door.

What about composite doors?

Composite doors are much thicker than a uPVC panel, so cutting through them is harder. It may also affect the door’s warranty. If your composite door has a glazed section, fitting the flap in a new glass unit is often the cleaner option.

Dog doors in glass

Small dog doors can work in glass too. Even so, larger dogs need large holes, and those need large panes to stay within the glass rules. For big dogs, a wall or door panel installation is usually more practical.

Safety, security and warmth

A well-fitted cat flap in glass shouldn’t compromise your home. Still, there are three things worth checking.

Safety glass rules

Building regulations require safety glass in doors and in glazing close to the floor. Because cat flaps always sit low down, the new unit will be toughened or laminated. The detailed guidance sits in Approved Document K.

Security

Choose a flap you can lock, and position it away from the handle and key. Also remember that a flap is only as secure as the door around it, so check the door lock while you’re at it.

Warmth and draughts

Any flap lets in a little air. Nevertheless, a good-quality flap with brush or magnetic seals keeps losses small. Because the rest of the unit is still sealed double glazing, the glass keeps its insulation.

Helping your cat use the new flap

Most cats learn quickly, but some are suspicious of anything new. Once your cat flap in glass is in, give them a few days to get used to it.

  • Prop the flap open at first, so your cat can see straight through.
  • Use treats or a favourite toy on the other side to tempt them.
  • Rub a cloth on your cat’s cheeks, then on the flap, so it smells familiar.
  • Never push your cat through, because that can put them off for weeks.

With a microchip flap, register your cat’s chip before you start training. Also, if you’ve just moved house, keep your cat indoors for the first few weeks before opening the flap.

Renting, new doors and moving house

If you rent, get written permission from your landlord before booking a cat flap in glass. Many landlords agree, particularly if you offer to put plain glass back when you leave.

Planning a new door? Ask for the glass to be made with the hole from the start. That costs far less than replacing a brand-new unit later.

When you move, you have two choices. You can leave the flap for the next owner, or you can swap the unit back for plain glass.

Quick answers about a cat flap in glass

Can you fit a cat flap in toughened glass?

Not into an existing pane, because toughened glass shatters if you cut it. Instead, the glazier orders a new toughened unit with the hole already in place.

How long does it take to fit a cat flap in glass?

Expect a survey visit, then typically a week or two while the factory makes the unit. The fitting visit itself usually takes well under half a day.

Will a cat flap make my door less secure?

Not if it’s positioned well. Keep it away from the handle and lock, and choose a flap you can lock at night.

Is the new glass unit guaranteed?

Yes. Our new sealed units come with a 10-year manufacturer guarantee, and our workmanship is guaranteed for at least 12 months.

Do you fit cat flaps in my part of Bracknell?

Yes, across the whole town, including cat flap fitting in Crown Wood and glass door repairs in Harmans Water. See the full list on our areas we cover page.

The type of glass decides whether a cat flap can be fitted. Our Guildford team explains the difference between toughened and laminated glass and where each is required.

The bottom line

A cat flap in glass is a neat, permanent solution, as long as you plan it properly. Measure your cat, choose a flap that suits glass and position it well away from the lock.

Then let a glazier handle the new unit, so the seal, the safety glass and the fit are all right first time. Find out more about our double glazing repairs and glass units, or browse all our window and door services.

Give your cat its freedom, without the draughts

New sealed units come with a 10-year manufacturer guarantee, and our workmanship is guaranteed for at least 12 months. Free quotes and no call-out fee. Call 07951 152 986 today.

Leave a Reply

Your email address will not be published. Required fields are marked *